12/31/2011
FZRC (Sarasota)
Day 1 of a 2 race day weekend.
Stock Short Course, planed to race the SC10 both days. Track was GREAT, racing was GREAT, 4 Mod SC racers decided to join in on the fun in Stock SC. Drove my heart out and finished 5th! Right where I qualified!
Paul decided to NOT race his Losi 4wd SC in the A-main for that class. He offered the ride to me! :-) As I had not qualified in that class I started in last (8th) place to be fair (my idea) to the other racers. I have NEVER drove OR raced a Ele 4wd SC in my life. Paul has the new Castle Mumba Max 4 pole system in the Losi, this is faster in a straight line than I can turn my head to drive it!!! Finished 6th :-)
Day two starts at 9:15am for signup.
===
New (used) Gens ACE 5000 Lipo was on my desk when I got home from today's racing. Will charge this tomorrow for the days racing.
.
Sunday, December 25, 2011
12/24/11
FZRC (Sarasota)
A day of test and tune. :-)
RC10T4
Played with the T4 with the 17.5 system, like the 13.5 system better!!!!
XXX-SCT
Received a Speed Passion Exige 2.0 with a 3600kv motor for "Make a RC Wish", so :-) I didn't like the power of the 3600 motor, removed the 13.5mm rotor and installed a 12.5mm rotor. Now it's stupid FAST!!!!
Hit a pipe ripped the left front a-arm off* FZRC had a set! :-)
SC10
Was testing the SC10 with the Castle system installed, trying to decide which SC to race Mod SC class with. Mike a fellow racer, asked me to drive his 17.5 blinky Stock SC SC10 for a few laps. WRONG thing to do!!!! It drove BETTER than mine, off came the body and a look at the chassis. Started changing mine to fit his setup one bit at a time. After three changes my SC10 was a good as his! :-)
Then Mike let it slip, he is using Ryan Mayfield setup for clay bluegroove! :-) Downloaded it from rc10.com
===
* I have a large supply of right front and rear a-arms cause I rip the left side off of any RC I drive!!!!!! :-( Most of the tracks I race at race counter-clock wise and have a long front straight before the first left turn! :-)
.
FZRC (Sarasota)
A day of test and tune. :-)
RC10T4
Played with the T4 with the 17.5 system, like the 13.5 system better!!!!
XXX-SCT
Received a Speed Passion Exige 2.0 with a 3600kv motor for "Make a RC Wish", so :-) I didn't like the power of the 3600 motor, removed the 13.5mm rotor and installed a 12.5mm rotor. Now it's stupid FAST!!!!
Hit a pipe ripped the left front a-arm off* FZRC had a set! :-)
SC10
Was testing the SC10 with the Castle system installed, trying to decide which SC to race Mod SC class with. Mike a fellow racer, asked me to drive his 17.5 blinky Stock SC SC10 for a few laps. WRONG thing to do!!!! It drove BETTER than mine, off came the body and a look at the chassis. Started changing mine to fit his setup one bit at a time. After three changes my SC10 was a good as his! :-)
Then Mike let it slip, he is using Ryan Mayfield setup for clay bluegroove! :-) Downloaded it from rc10.com
===
* I have a large supply of right front and rear a-arms cause I rip the left side off of any RC I drive!!!!!! :-( Most of the tracks I race at race counter-clock wise and have a long front straight before the first left turn! :-)
.
Sunday, December 18, 2011
12/18/2011
FZRC (Sarasota, FL)
FZRC had received a load of clay Tuesday, Shane and Marty finished late Saturday.
Track black grooved by the 2nd qual.
===
Losi XXX-SCT
Had put the Speed Passion GT2.0 esc and EzRun 17.5 motor from the SC10 in. Did a little test and tune this morning. Changed front and rear spring up one size, hoping to handle the new jumps.
Stock Short Course
TQ'd 1st and 2nd qual, in the 2nd qual I had two laps on the next racer! :-)
Decided to NOT lap everyone in the main, still had the fastest lap of the day in Stock SC class.
===
Taking next week off (track isn't racing) *Smile*
.
FZRC (Sarasota, FL)
FZRC had received a load of clay Tuesday, Shane and Marty finished late Saturday.
Track black grooved by the 2nd qual.
===
Losi XXX-SCT
Had put the Speed Passion GT2.0 esc and EzRun 17.5 motor from the SC10 in. Did a little test and tune this morning. Changed front and rear spring up one size, hoping to handle the new jumps.
Stock Short Course
TQ'd 1st and 2nd qual, in the 2nd qual I had two laps on the next racer! :-)
Decided to NOT lap everyone in the main, still had the fastest lap of the day in Stock SC class.
===
Taking next week off (track isn't racing) *Smile*
.
Friday, December 16, 2011
12/10/2011
FZRC (Sarasota, FL)
I have GOT to remember to post results here!!!!!
They blended Stock and Mod SC together. I was the ONLY Stock SC (without boost). Finished 6th in the first qual with the Losi XXX-SCT. :-(
Raced the SC10 in the 2nd and 3rd qual. The Novak 13.5 was still under powered compared to the other cars. Was able to qual for a 4th starting spot for the main. Was in 2nd for 6 of the 8 minutes :-) About 90 sec to go the racer who did finish 2nd passed me.
The SC10 handled GREAT even with the power of the 13.5, remember last week, finished 1st and lapped ALL the other cars with a 17.5 motor in.
Plan to have a Speed Passion 10.5 motor if for Mod SC this weeks race.
===
Ordered a LCD program box for the Speed Passion GT2.0 esc. This is so I can add some "Boost" in 17.5 Stock SC class.
.
FZRC (Sarasota, FL)
I have GOT to remember to post results here!!!!!
They blended Stock and Mod SC together. I was the ONLY Stock SC (without boost). Finished 6th in the first qual with the Losi XXX-SCT. :-(
Raced the SC10 in the 2nd and 3rd qual. The Novak 13.5 was still under powered compared to the other cars. Was able to qual for a 4th starting spot for the main. Was in 2nd for 6 of the 8 minutes :-) About 90 sec to go the racer who did finish 2nd passed me.
The SC10 handled GREAT even with the power of the 13.5, remember last week, finished 1st and lapped ALL the other cars with a 17.5 motor in.
Plan to have a Speed Passion 10.5 motor if for Mod SC this weeks race.
===
Ordered a LCD program box for the Speed Passion GT2.0 esc. This is so I can add some "Boost" in 17.5 Stock SC class.
.
Monday, December 5, 2011
12/4/2011
FZRC
Tested the XXX-SCT for about five laps.
Not happy, so I parked it. Cause I wanted to race in Stock SC class.
====
SC10 :-)
Had a little push in the corners, moved 1 oz of weight from the rear to the front. That was a GREAT improvement BUT need a bit more balance in four of the seven corners.
Pulled the Blue RC Bible out of the pit box, to check on link options. I was looking for MORE forward traction coming out of a turn. Rear link mount at chassis, the base setting is one .030 washer under the ballstud. I had none!!!!! Added two per ballstud, one to get back to base setting and one to "Hopefully" get the forward traction that I was looking for. Can't go to far or I will be giving up side bite. Without side bite the rear will swing around, causing the car to lose speed and control.
The diff between no washers and 2 washers >> no washers missed TQ by 2 seconds, with 2 washers lapped ALL the other racer in the 10 minute main for a dominating 1st.
The SC10 was the most balanced EVER!!!
So, I took everything out of the SC10 and put it in the XXX-SCT for next weeks race!
Plan to race the SC10 in Mod SC class so the Castle esc and motor will go in.
.
FZRC
Tested the XXX-SCT for about five laps.
Not happy, so I parked it. Cause I wanted to race in Stock SC class.
====
SC10 :-)
Had a little push in the corners, moved 1 oz of weight from the rear to the front. That was a GREAT improvement BUT need a bit more balance in four of the seven corners.
Pulled the Blue RC Bible out of the pit box, to check on link options. I was looking for MORE forward traction coming out of a turn. Rear link mount at chassis, the base setting is one .030 washer under the ballstud. I had none!!!!! Added two per ballstud, one to get back to base setting and one to "Hopefully" get the forward traction that I was looking for. Can't go to far or I will be giving up side bite. Without side bite the rear will swing around, causing the car to lose speed and control.
The diff between no washers and 2 washers >> no washers missed TQ by 2 seconds, with 2 washers lapped ALL the other racer in the 10 minute main for a dominating 1st.
The SC10 was the most balanced EVER!!!
So, I took everything out of the SC10 and put it in the XXX-SCT for next weeks race!
Plan to race the SC10 in Mod SC class so the Castle esc and motor will go in.
.
Saturday, December 3, 2011
11/19/11
FZRC Sarasota
XXX-SCT
Stock SC, John and I got owned as Rachael beat us across the start/finish line on lap 1 in the 8 minute A-main. A half a lap later John and Rachael bumped each other I got past them and I lead to the finish!!!
===
SC10
Mod SC, qual'd 7th finished 4th. That's all that I can remember.
Note to self >> BLOG within 24 hours of race!!!!
.
FZRC Sarasota
XXX-SCT
Stock SC, John and I got owned as Rachael beat us across the start/finish line on lap 1 in the 8 minute A-main. A half a lap later John and Rachael bumped each other I got past them and I lead to the finish!!!
===
SC10
Mod SC, qual'd 7th finished 4th. That's all that I can remember.
Note to self >> BLOG within 24 hours of race!!!!
.
11/27/11
FZRC (Sarasota)
Tested the T4 with a Speed Passion Inspire 2.0 esc with a EzRun 9 motor. Hey it's only a half a turn more of a motor than the esc is spec'd out as!!! Had to turn the throttle down to 90% (Max is 150%) on the Spekturm radio! Testing was FUN but I needed to get one of the SC's ready!
===
SC10
Speed Passion GT2.0 esc and a Speed Passion 10.5 motor, just could NOT get the tires to stick!!! :-) Track was to cold for the calcium to fully set. Track looked good but didn't have the traction it had the two weeks before.
===
XXX-SCT
Had planed to race "Stock" SC class, so I loaded a Speed Passion GT1.1 esc and a LRP 13.5 motor. As stated above (SC10) the track was odd, tested all my good tires and put on the best for the 10 minute main. Turn two was hit and had a front link come loose was down a lap by the time the marshal got it repaired. By the 4 minute mark I had made the lap up on 4th place and as I passed him we touched, I hit a pipe and the right rear hub broke into two parts!!!! :-(
My third DNF (Did Not Finish) 2nd in a SC class (1 with the T4) this year!!! Not happy about that, just four races to the end of 2011!
.
FZRC (Sarasota)
Tested the T4 with a Speed Passion Inspire 2.0 esc with a EzRun 9 motor. Hey it's only a half a turn more of a motor than the esc is spec'd out as!!! Had to turn the throttle down to 90% (Max is 150%) on the Spekturm radio! Testing was FUN but I needed to get one of the SC's ready!
===
SC10
Speed Passion GT2.0 esc and a Speed Passion 10.5 motor, just could NOT get the tires to stick!!! :-) Track was to cold for the calcium to fully set. Track looked good but didn't have the traction it had the two weeks before.
===
XXX-SCT
Had planed to race "Stock" SC class, so I loaded a Speed Passion GT1.1 esc and a LRP 13.5 motor. As stated above (SC10) the track was odd, tested all my good tires and put on the best for the 10 minute main. Turn two was hit and had a front link come loose was down a lap by the time the marshal got it repaired. By the 4 minute mark I had made the lap up on 4th place and as I passed him we touched, I hit a pipe and the right rear hub broke into two parts!!!! :-(
My third DNF (Did Not Finish) 2nd in a SC class (1 with the T4) this year!!! Not happy about that, just four races to the end of 2011!
.
Monday, November 7, 2011
11/7/11
FZRC (Sarasota)
Track was premo!!!
Ran the SC10 in the first qual, VERY NICE. Have the NEW Speed Passion GT 2.0 esc and the Novak 13.5 motor in it. Good speed and GREAT handling. Only setup change was the move of the rear shock to the top shock mount to the "0" hole.
Ran the XXX-SCT in the second qual, was surprised by how well it handled!!! The only change was the removal of the front sway bar and the installation of a rear sway bar!
Remember I was having diff gear problems and have changed to a metal diff gear, two weekends and NO diff problems. Had the Castle Sidewinder SCT esc and 4600 motor in it.
Choose to race the SC10 in the a-main, qual 9th. By turn two I was 5th, turn three I was 12th :-( By lap 4 I was in 8th, just behind 5th, 6th and 7th when we tried to pass a couple racers. Two hit me, I hit the pipe and that remove both links (steering and camber) on the right front!!! Limped around the track to where I was, seen what was wrong, walked over to my pit took some links off the T4 truck and got back into the race with 45 sec's to the finish!! Still didn't finish last, another racer broke before I did!!
.
FZRC (Sarasota)
Track was premo!!!
Ran the SC10 in the first qual, VERY NICE. Have the NEW Speed Passion GT 2.0 esc and the Novak 13.5 motor in it. Good speed and GREAT handling. Only setup change was the move of the rear shock to the top shock mount to the "0" hole.
Ran the XXX-SCT in the second qual, was surprised by how well it handled!!! The only change was the removal of the front sway bar and the installation of a rear sway bar!
Remember I was having diff gear problems and have changed to a metal diff gear, two weekends and NO diff problems. Had the Castle Sidewinder SCT esc and 4600 motor in it.
Choose to race the SC10 in the a-main, qual 9th. By turn two I was 5th, turn three I was 12th :-( By lap 4 I was in 8th, just behind 5th, 6th and 7th when we tried to pass a couple racers. Two hit me, I hit the pipe and that remove both links (steering and camber) on the right front!!! Limped around the track to where I was, seen what was wrong, walked over to my pit took some links off the T4 truck and got back into the race with 45 sec's to the finish!! Still didn't finish last, another racer broke before I did!!
.
Wednesday, November 2, 2011
11/2/11
I have a pile of 6 FRIED ESC's and 3 FRIED motors in the past year! :-(
BUT :-), the Speed Passion GT 2.0 has been replaced under sellers warranty, last week SWEEEET!!!
Decided to have another look at the two Castle esc's. The led won't lite on the Sidewinder esc STILL so I'm guessing its really and truly DEAD!
Tried the Sidewinder SCT and it would take a PC link programing. << HOPE rises!!
Put it in the AE SC10 and it would not program to the radio!!! As I was looking at the esc/motor in the SC10, I remembered that you can switch the wires going from the esc to the motor to reverse the direction of the motor. Ding DING DING The radio throttle control maybe set to the wrong direction. Changed the setting and BINGO the esc is working!! The esc WAS in the Losi XXX-SCT and was set for that SC.
That makes only 4 FRIED ESC's and 3 FRIED motors.
===
Picked up a Speed Passion Cirtix Insire 2.0 as a backup, now have MORE esc's than RC trucks!!!
===
Avid bearings has QUICK shipping, received 3 sets of motor bearing in 3 days. All my motors are ready to go! :-)
.
I have a pile of 6 FRIED ESC's and 3 FRIED motors in the past year! :-(
BUT :-), the Speed Passion GT 2.0 has been replaced under sellers warranty, last week SWEEEET!!!
Decided to have another look at the two Castle esc's. The led won't lite on the Sidewinder esc STILL so I'm guessing its really and truly DEAD!
Tried the Sidewinder SCT and it would take a PC link programing. << HOPE rises!!
Put it in the AE SC10 and it would not program to the radio!!! As I was looking at the esc/motor in the SC10, I remembered that you can switch the wires going from the esc to the motor to reverse the direction of the motor. Ding DING DING The radio throttle control maybe set to the wrong direction. Changed the setting and BINGO the esc is working!! The esc WAS in the Losi XXX-SCT and was set for that SC.
That makes only 4 FRIED ESC's and 3 FRIED motors.
===
Picked up a Speed Passion Cirtix Insire 2.0 as a backup, now have MORE esc's than RC trucks!!!
===
Avid bearings has QUICK shipping, received 3 sets of motor bearing in 3 days. All my motors are ready to go! :-)
.
Sunday, October 23, 2011
10/23/2011
FZRC (Sarasota)
T4
Did some testing and like what I had to work with. :-)
BUT, choose to change the body and tires to make it a J82 buggy.
With the Speed Passion GT1.1 esc and Novak 13.5 motor installed the J82 was a SWEEET buggy made the A-main qual 7th. Got passed by 1st, 2nd and 3rd about every 3rd-4th lap!!!!
Forgot to look at the results to see where I finished!
===
XXX-SCT
Esc and motor was just JUNK!!!
Installed a Corelly MMN3 esc and a 19x2 spec motor, they had NO speed!!
Parked it!
===
SC10
Installed a Novak Dually esc and a 14x2 mod motor, this was one fast SC!!!! :-)
Noticed about minute 5 of the 6 minute qual the SC10 was slowing down, hoped that the motor was OK! 40 sec's to go and there was NO go from the motor. Put new brushes in and thought I was good to go!!! 2nd qual by the 2 minute mark I was dead on the track. Took the motor out of the XXX-SCT, replaced the brushes and installed the motor.
Was in 1st place in the SC Mod B-main by a half a lap when the motor FRIED!!!
Been to meany years of brushless motor gearing, forgot how to gear a brush motor, powered by a lipo battery! :-(
===
Ordered a Speed Passion Inspire 2.0 esc should be here by Thursday, I hope!!
Also hope to have a Speed Passion GT 2.0 esc replaced in the next seven days!!!
.
FZRC (Sarasota)
T4
Did some testing and like what I had to work with. :-)
BUT, choose to change the body and tires to make it a J82 buggy.
With the Speed Passion GT1.1 esc and Novak 13.5 motor installed the J82 was a SWEEET buggy made the A-main qual 7th. Got passed by 1st, 2nd and 3rd about every 3rd-4th lap!!!!
Forgot to look at the results to see where I finished!
===
XXX-SCT
Esc and motor was just JUNK!!!
Installed a Corelly MMN3 esc and a 19x2 spec motor, they had NO speed!!
Parked it!
===
SC10
Installed a Novak Dually esc and a 14x2 mod motor, this was one fast SC!!!! :-)
Noticed about minute 5 of the 6 minute qual the SC10 was slowing down, hoped that the motor was OK! 40 sec's to go and there was NO go from the motor. Put new brushes in and thought I was good to go!!! 2nd qual by the 2 minute mark I was dead on the track. Took the motor out of the XXX-SCT, replaced the brushes and installed the motor.
Was in 1st place in the SC Mod B-main by a half a lap when the motor FRIED!!!
Been to meany years of brushless motor gearing, forgot how to gear a brush motor, powered by a lipo battery! :-(
===
Ordered a Speed Passion Inspire 2.0 esc should be here by Thursday, I hope!!
Also hope to have a Speed Passion GT 2.0 esc replaced in the next seven days!!!
.
Friday, October 21, 2011
10/21/2011
Got the SC10 out to prep for Sunday race at FZRC, the Castle Sidewinder esc was dead!!! Worked fine last Sat, 6 days ago!!! :-( that 6 esc's now!!!!!!!
===
Losi XXX-SCT
Got the alum diff gear Thursday and the CR outdrives today, so it's DIFF rebuild time!!! Hopefully the last time for a while, like more than two weeks!!!!!
Because the Speed Passion esc died for the Losi I have a Corally esc and a 19x2 brush motor in it.
SC10
Because the Castle esc died I have a Novak Dually esc and a 14x2 brush motor in it!!!
T4
Have the OLD Speed Passion GT1.1 esc and Novak 13.5 motor in it, HOPEFULLY it won't die this weekend!!!
.
Got the SC10 out to prep for Sunday race at FZRC, the Castle Sidewinder esc was dead!!! Worked fine last Sat, 6 days ago!!! :-( that 6 esc's now!!!!!!!
===
Losi XXX-SCT
Got the alum diff gear Thursday and the CR outdrives today, so it's DIFF rebuild time!!! Hopefully the last time for a while, like more than two weeks!!!!!
Because the Speed Passion esc died for the Losi I have a Corally esc and a 19x2 brush motor in it.
SC10
Because the Castle esc died I have a Novak Dually esc and a 14x2 brush motor in it!!!
T4
Have the OLD Speed Passion GT1.1 esc and Novak 13.5 motor in it, HOPEFULLY it won't die this weekend!!!
.
Saturday, October 15, 2011
10/15/2011
FZRC (Sarasota)
First Saturday race ever!!! :-)
Picked up a Speed Passion GT 2.0 esc installed it in the T4 tested fine Thursday night, as I turned it on today it SMOKED!!!! :-(
Raced the SC10 today missed TQ by 3 seconds in Mod SC class. Was in 1st by mid 1st lap, 2nd at the line. 1st at the line on lap two, got passed as I hit a pipe and NEVER got closer than 6-8 foot to 1st after that. At the seven minute mark 3rd got by as I tried to pass 8th, 9th and hit a pipe!!!!!!
===
In one year have had 5 esc's die!!!!! NOT a good thing!!!!
2 - Castle Sidewinder SCT = $100
1 - Novak GTB = $40
1 - Novak Havoc Pro SC = $50
1 - Speed Passion GT 2.0 = $60
NOT A HAPPY CAMPER!!!!!!!!!!!!!!!
.
FZRC (Sarasota)
First Saturday race ever!!! :-)
Picked up a Speed Passion GT 2.0 esc installed it in the T4 tested fine Thursday night, as I turned it on today it SMOKED!!!! :-(
Raced the SC10 today missed TQ by 3 seconds in Mod SC class. Was in 1st by mid 1st lap, 2nd at the line. 1st at the line on lap two, got passed as I hit a pipe and NEVER got closer than 6-8 foot to 1st after that. At the seven minute mark 3rd got by as I tried to pass 8th, 9th and hit a pipe!!!!!!
===
In one year have had 5 esc's die!!!!! NOT a good thing!!!!
2 - Castle Sidewinder SCT = $100
1 - Novak GTB = $40
1 - Novak Havoc Pro SC = $50
1 - Speed Passion GT 2.0 = $60
NOT A HAPPY CAMPER!!!!!!!!!!!!!!!
.
Friday, October 7, 2011
10/7/2011
Installed the Castle Sidewinder esc and 4600 motor in the Losi XXX-SCT, reason for this is the Speed Passion GT1.1 esc and Novak 13.5 motor isn't POWERFUL enough at FZRC! They where GREAT as a test last Sunday at FZRC, now for POWER!!!! :-)
Installed the Speed Passion GT1.1 esc and Novak 13.5 motor in the SC10, may change the motor to a Fantom 17.5 to better fit Stock SC class, there were TWO adults in Stock SC last Sunday at FZRC.
.
Installed the Castle Sidewinder esc and 4600 motor in the Losi XXX-SCT, reason for this is the Speed Passion GT1.1 esc and Novak 13.5 motor isn't POWERFUL enough at FZRC! They where GREAT as a test last Sunday at FZRC, now for POWER!!!! :-)
Installed the Speed Passion GT1.1 esc and Novak 13.5 motor in the SC10, may change the motor to a Fantom 17.5 to better fit Stock SC class, there were TWO adults in Stock SC last Sunday at FZRC.
.
Sunday, October 2, 2011
10/2/2011
FZRC (Sarasota)
SC10
Was sweet, KINDA!!!! FZRC track crew put calcium on the track surface Sat night AND the track surface wasn't ready at 8:15am when I put the SC10 on the track for a test!
Needed some SUN to burn (dry) the surface in.
Planned to race the SC10 in the first qual and the XXX-SCT in the second qual then race the best in a main.
Parked the SC10 before the qual's!!!!!!!
XXX-SCT
Remember I removed the Losi trans and installed a Associated trans.
TESTING was GREAT! Adjusted the front and rear camber, moved some weight from the front to the rear. Found a set of Proline Calibers (M4 rubber compound)that I had "Sauced" with belt dressing. The XXX-SCT was the MOST neutral handling RC I have ever drove!!!!
It took me 3 minutes of the 2nd qual to see how hard I could drive it, missed the A-main by 7 sec. So I TQ'd the B-main and lead for 4 of the 6 minutes. I was passed just a lap AFTER I passed 3rd, so I knew I would bump up to the A-main.
Started the A-main in 10th, was in 4th at the 6th corner of the first lap when 5th - 8th ran over me coming out of 6th!!!! Crossed the timing line in 9th and it took 10th five minutes to catch and pass me! :-)
===
Team Holly Rollers member Scott and I have been trying to meet for about four months. On the drivers stand waiting to start the 2nd qual another racer (Jeff) introduced himself and Scott was standing next to him. I didn't know Scott was there and he didn't know I was there until then.
As I was restocking Scott's supply of THR stickers, he told me about Jeff. :-) Scott has been showing the LOVE of Jesus with Jeff and he is now back in church, where Dad go's so does the family!!! :-) As I was talking with Jeff his son, Corey, came up to use, I know Corey as we have raced each other in Stadium Truck and SC. Jeff asked how he could be a part of THR. I carry a copy of the 7? and a bag of stickers with me when I go to a track to race. When Jeff asked what stickers Corey wanted on his RC's, he said GREEN AND it was about time they where members!!!
.
FZRC (Sarasota)
SC10
Was sweet, KINDA!!!! FZRC track crew put calcium on the track surface Sat night AND the track surface wasn't ready at 8:15am when I put the SC10 on the track for a test!
Needed some SUN to burn (dry) the surface in.
Planned to race the SC10 in the first qual and the XXX-SCT in the second qual then race the best in a main.
Parked the SC10 before the qual's!!!!!!!
XXX-SCT
Remember I removed the Losi trans and installed a Associated trans.
TESTING was GREAT! Adjusted the front and rear camber, moved some weight from the front to the rear. Found a set of Proline Calibers (M4 rubber compound)that I had "Sauced" with belt dressing. The XXX-SCT was the MOST neutral handling RC I have ever drove!!!!
It took me 3 minutes of the 2nd qual to see how hard I could drive it, missed the A-main by 7 sec. So I TQ'd the B-main and lead for 4 of the 6 minutes. I was passed just a lap AFTER I passed 3rd, so I knew I would bump up to the A-main.
Started the A-main in 10th, was in 4th at the 6th corner of the first lap when 5th - 8th ran over me coming out of 6th!!!! Crossed the timing line in 9th and it took 10th five minutes to catch and pass me! :-)
===
Team Holly Rollers member Scott and I have been trying to meet for about four months. On the drivers stand waiting to start the 2nd qual another racer (Jeff) introduced himself and Scott was standing next to him. I didn't know Scott was there and he didn't know I was there until then.
As I was restocking Scott's supply of THR stickers, he told me about Jeff. :-) Scott has been showing the LOVE of Jesus with Jeff and he is now back in church, where Dad go's so does the family!!! :-) As I was talking with Jeff his son, Corey, came up to use, I know Corey as we have raced each other in Stadium Truck and SC. Jeff asked how he could be a part of THR. I carry a copy of the 7? and a bag of stickers with me when I go to a track to race. When Jeff asked what stickers Corey wanted on his RC's, he said GREEN AND it was about time they where members!!!
.
Thursday, September 29, 2011
Sunday, September 25, 2011
9/25/2011
Ordered MORE ball diff parts for the Losi XXX-SCT, I'm really $$$$$ tired of this part of a GREAT SC!
===
Had a thought, took the trans out of the T4, after 4 hours the trans was mounted in the Losi! Did some >> in front of the house << testing. Seems to be OK but will find out 9/30 (FIRCC) or 10/2 (FZRC).
.
Ordered MORE ball diff parts for the Losi XXX-SCT, I'm really $$$$$ tired of this part of a GREAT SC!
===
Had a thought, took the trans out of the T4, after 4 hours the trans was mounted in the Losi! Did some >> in front of the house << testing. Seems to be OK but will find out 9/30 (FIRCC) or 10/2 (FZRC).
.
Friday, September 23, 2011
9/23/2011
FIRCC (Plant City)
As I have stated before, I WANT TO RACE THE SC10!!!
The SC10 just has NOT been the SC to race at FIRCC in the past! By the end of practice the diff was gone in the Losi XXX-SCT AGAIN!!!!!
Put the Castle esc and motor in the SC10, changed the tires from the Losi to the SC10 also. Got a couple laps in before the first qual. Qual in 4th, lost both body clips during the second qual about two laps in, stopped to get one clip on so the body wouldn't lift on the jumps. Was only 6 sec's slower in the 2nd qual than the 1st even with the body mount stop!!! SWEET!!!
Missed the A-Main by 6 sec's!!!! S*****d body clips! :-(
Fourth lap into the B-Main driving away from 2nd, a right wheel axle pins broke into three parts. I have my FIRST DNF for the year!!!!
===
The Losi XXX-SCT will be put on the shelf as I can not keep putting out the $$$$$ for diff/trans rebuilds every two weeks!!!
.
FIRCC (Plant City)
As I have stated before, I WANT TO RACE THE SC10!!!
The SC10 just has NOT been the SC to race at FIRCC in the past! By the end of practice the diff was gone in the Losi XXX-SCT AGAIN!!!!!
Put the Castle esc and motor in the SC10, changed the tires from the Losi to the SC10 also. Got a couple laps in before the first qual. Qual in 4th, lost both body clips during the second qual about two laps in, stopped to get one clip on so the body wouldn't lift on the jumps. Was only 6 sec's slower in the 2nd qual than the 1st even with the body mount stop!!! SWEET!!!
Missed the A-Main by 6 sec's!!!! S*****d body clips! :-(
Fourth lap into the B-Main driving away from 2nd, a right wheel axle pins broke into three parts. I have my FIRST DNF for the year!!!!
===
The Losi XXX-SCT will be put on the shelf as I can not keep putting out the $$$$$ for diff/trans rebuilds every two weeks!!!
.
Sunday, September 18, 2011
9/18/2011
FZRC (Sarasota)
Two weeks a go FZRC removed the FL black sand dirt and replaced it with RED clay!!
Wasn't sure IF that was a wise change, until today!! They got the GOOD clay! :-)
===
RC10T4
Have the correct front tires and the absolute WRONG rear tires on today!!! But they where the ONLY tires I have!!! Finished 4th in ST class! :-)
SC10
Drove well during practice BUT the 13.5 wasn't enough motor for Mod SC class, so I parked it!
XXX-SCT
Put the best tires I have on the Losi and changed some of the setup (removed everything I put on from the RC Driver mag setup). Got a look at the TQ racers SC10 and made changes to the XXX-SCT!!! Added 1 and half oz of LEAD to the front and 2 oz to the rear. The SC settled down and drove SWEET!!!!! Sweet enough to finish just .003 of a sec behind 5th! Started in 7th and was in last (9th) at turn three!
===
Picked up a NEW set of JConcepts Carvers to replace the 6 month old set of Carvers I have been using!!!
.
FZRC (Sarasota)
Two weeks a go FZRC removed the FL black sand dirt and replaced it with RED clay!!
Wasn't sure IF that was a wise change, until today!! They got the GOOD clay! :-)
===
RC10T4
Have the correct front tires and the absolute WRONG rear tires on today!!! But they where the ONLY tires I have!!! Finished 4th in ST class! :-)
SC10
Drove well during practice BUT the 13.5 wasn't enough motor for Mod SC class, so I parked it!
XXX-SCT
Put the best tires I have on the Losi and changed some of the setup (removed everything I put on from the RC Driver mag setup). Got a look at the TQ racers SC10 and made changes to the XXX-SCT!!! Added 1 and half oz of LEAD to the front and 2 oz to the rear. The SC settled down and drove SWEET!!!!! Sweet enough to finish just .003 of a sec behind 5th! Started in 7th and was in last (9th) at turn three!
===
Picked up a NEW set of JConcepts Carvers to replace the 6 month old set of Carvers I have been using!!!
.
Monday, September 12, 2011
9/11/2011
Losi XXX-SCT
Another diff re-build!!!!!!!!!!!!!!!!!
The idler gear scooped out a section of four/five teeth of the diff gear!!!
Checked Losi site for a BETTER diff gear, there is NO SUCH THING from Losi!!!
RRP make a Alum gear
===
This is the fourth diff re-build since Jan 1, 2011!!!!!!!!!!!!!!!
I've raced AE trucks since March 2004 and re-built there diff's only once or twice a year!
.
Losi XXX-SCT
Another diff re-build!!!!!!!!!!!!!!!!!
The idler gear scooped out a section of four/five teeth of the diff gear!!!
Checked Losi site for a BETTER diff gear, there is NO SUCH THING from Losi!!!
RRP make a Alum gear
===
This is the fourth diff re-build since Jan 1, 2011!!!!!!!!!!!!!!!
I've raced AE trucks since March 2004 and re-built there diff's only once or twice a year!
.
Saturday, September 10, 2011
9/9/2011
FIRCC (Plant City)
RC10T4 FT
Installed a MMN3 esc and a 17x2 brush motor in to have a try at Stadium Truck class. During practice never got the motor temps below 200 degrees!!! Anything over 170 degrees after 5 minutes of running is VERY BAD!!! Parked it for the night! :-(
===
XXX-SCT
Had installed the Castle Sidewinder esc, 4600 motor combo. Hoping the Losi diff would hold up to the power of the 4600 motor. Lasted through practice and one qual! Developed a odd noise, sounds like a axle loose at a outdrive, BUT no visible evidence of this!
Parked it!!! :-(
===
SC10
Put the tires from the XXX-SCT on for the 2nd qual. The truck was just a hand full!! Moved the rear link to the middle hole on the rear wheel hubs HELPED a lot. NEED NEW TIRES SOON!!!!!!!
Finished 3rd in the B-main!
.
FIRCC (Plant City)
RC10T4 FT
Installed a MMN3 esc and a 17x2 brush motor in to have a try at Stadium Truck class. During practice never got the motor temps below 200 degrees!!! Anything over 170 degrees after 5 minutes of running is VERY BAD!!! Parked it for the night! :-(
===
XXX-SCT
Had installed the Castle Sidewinder esc, 4600 motor combo. Hoping the Losi diff would hold up to the power of the 4600 motor. Lasted through practice and one qual! Developed a odd noise, sounds like a axle loose at a outdrive, BUT no visible evidence of this!
Parked it!!! :-(
===
SC10
Put the tires from the XXX-SCT on for the 2nd qual. The truck was just a hand full!! Moved the rear link to the middle hole on the rear wheel hubs HELPED a lot. NEED NEW TIRES SOON!!!!!!!
Finished 3rd in the B-main!
.
Monday, September 5, 2011
9/5/2011
The new (used) Castle Sidewinder SCT is dead!!! Died sometime as I removed it from the SC10 to install the Castle Sidewinder last Fri night at FIRCC!!!!! :-( How I did that, I don't know!!!!
===
I'm 41 days from 61 and one year from retirement! So it looks like I've got 406 days of RC left, I won't have the $$$$ to RC race in 406 days. May go back to fishing. :-(
.
The new (used) Castle Sidewinder SCT is dead!!! Died sometime as I removed it from the SC10 to install the Castle Sidewinder last Fri night at FIRCC!!!!! :-( How I did that, I don't know!!!!
===
I'm 41 days from 61 and one year from retirement! So it looks like I've got 406 days of RC left, I won't have the $$$$ to RC race in 406 days. May go back to fishing. :-(
.
Saturday, September 3, 2011
9/2/2011
FIRCC (Plant City)
Received the new (used from R/C Tech) Castle 4600 motor and Castle Sidewinder SCT esc a week ago. Remember I put these into the SC10 for last weeks race at FZRC. Tested and tested and tested at FIRCC before the first qual. I REALY want to race the SC10. Played with the rear shocks, front shocks, front springs, tires and gearing. Motor seemed to have a bog from the start for about a foot and a half, reason for a LOT of gearing testing! In the dirt last Sunday, this wasn't so noticeable as it was on carpet.
The lap times for the SC10 with the Sidwinder SCT just wasn't good. Mid 17 sec was the best for the night, need at least mid 16 sec to be in the A-main!!! Took the Sidewinder (not a SCT version) out of the T4, installed it in the SC10 and was in the high 16 sec in two laps!!!!! Didn't have time to test the setup before the first qual :-(. Drive-ability was real bad, everything I did to get the SC10 to handle with the SCT didn't work with the Sidewinder. Rear was over rotating coming out of the 90 degree turns or the front would push out in the 180 degree turns!!! Qual'd 5th out of 5!! :-(
Got the Losi XXX-SCT out put the tires off the SC10 on, TQ'd the 2nd qual for a 6th place start in the A-main! :-) Was in first just one foot from the timing line on the first laps, crossed the line 3rd after catching the pipe at the line!!! Finished 4th SWEEEET!!!
===
I'm just 44 days from being 61 and I'm noticing a drop in my hand - eye ability over a year ago! I'm the "OLD" man at every track now!!! :-)
.
FIRCC (Plant City)
Received the new (used from R/C Tech) Castle 4600 motor and Castle Sidewinder SCT esc a week ago. Remember I put these into the SC10 for last weeks race at FZRC. Tested and tested and tested at FIRCC before the first qual. I REALY want to race the SC10. Played with the rear shocks, front shocks, front springs, tires and gearing. Motor seemed to have a bog from the start for about a foot and a half, reason for a LOT of gearing testing! In the dirt last Sunday, this wasn't so noticeable as it was on carpet.
The lap times for the SC10 with the Sidwinder SCT just wasn't good. Mid 17 sec was the best for the night, need at least mid 16 sec to be in the A-main!!! Took the Sidewinder (not a SCT version) out of the T4, installed it in the SC10 and was in the high 16 sec in two laps!!!!! Didn't have time to test the setup before the first qual :-(. Drive-ability was real bad, everything I did to get the SC10 to handle with the SCT didn't work with the Sidewinder. Rear was over rotating coming out of the 90 degree turns or the front would push out in the 180 degree turns!!! Qual'd 5th out of 5!! :-(
Got the Losi XXX-SCT out put the tires off the SC10 on, TQ'd the 2nd qual for a 6th place start in the A-main! :-) Was in first just one foot from the timing line on the first laps, crossed the line 3rd after catching the pipe at the line!!! Finished 4th SWEEEET!!!
===
I'm just 44 days from being 61 and I'm noticing a drop in my hand - eye ability over a year ago! I'm the "OLD" man at every track now!!! :-)
.
Sunday, August 28, 2011
8/28/2011
FZRC (Sarasota)
XXX-SCT
Loaded the Speed Passion GT1.1 esc and Novak 13.5 motor on the XXX-SCT. Tested well, decided to race the first qual with this.
SC10
Loaded the new Castle Sidewinder SCT esc and Castle 4700 motor on the SC10. After talking with my brother Rick. Put Losi orange shock pistons and springs on the front and Losi red shock piston and springs on the rear! This created one Sweet turning SC!!!
Decided to race this in the 2nd qual, then race the one I liked in the main!
Was listed 6th with the Losi XXX-SCT, but after the 2nd qual with the SC10 I was starting in 4th! Sweet!!!
Now comes the rant!!!!! :-(
Was 3rd into the 2nd turn, two orange SC's hacked me into 7th and one hacked me lap after lap after lap, by the time I got clear of him (don't know if it was just one of them or they took turns!) I was two laps down! Then 1st passed me on the last lap to put me down 3! I was able to get a 5th, just a foot or two behind 4th!!!
===
Worked with Jim to better mount his new Slash body. We both got a couple hot dogs/drink and sat in my pits to talk about the RC hobby! Jim then went out and finished 1st in the Mod SC B-main, so he bumped up into the A-main with me! Jim finished on the same lap as me in 6th.
.
FZRC (Sarasota)
XXX-SCT
Loaded the Speed Passion GT1.1 esc and Novak 13.5 motor on the XXX-SCT. Tested well, decided to race the first qual with this.
SC10
Loaded the new Castle Sidewinder SCT esc and Castle 4700 motor on the SC10. After talking with my brother Rick. Put Losi orange shock pistons and springs on the front and Losi red shock piston and springs on the rear! This created one Sweet turning SC!!!
Decided to race this in the 2nd qual, then race the one I liked in the main!
Was listed 6th with the Losi XXX-SCT, but after the 2nd qual with the SC10 I was starting in 4th! Sweet!!!
Now comes the rant!!!!! :-(
Was 3rd into the 2nd turn, two orange SC's hacked me into 7th and one hacked me lap after lap after lap, by the time I got clear of him (don't know if it was just one of them or they took turns!) I was two laps down! Then 1st passed me on the last lap to put me down 3! I was able to get a 5th, just a foot or two behind 4th!!!
===
Worked with Jim to better mount his new Slash body. We both got a couple hot dogs/drink and sat in my pits to talk about the RC hobby! Jim then went out and finished 1st in the Mod SC B-main, so he bumped up into the A-main with me! Jim finished on the same lap as me in 6th.
.
Saturday, August 20, 2011
8/19/2011
FIRCC (Plant City)
Wanted to race the SC10, WANTED IT BAD!!!!!! :-)
After four practice sessions, moved to the XXX-SCT!!!!
20 foot into the 4th practice the Castle Sidewinder SCT esc died in the SC10!!!! :-(
Had fast enough 1st qual to put me into the A-main, 5th starting place. After the 2nd qual I was still in the A-main but will start 8th!
6 of the 8 in the A-main were ex-Farmers racers! Very SWEEEET!!!
Started 8th finished 8th, ANY time you make the A-main where ever you finish it's SWEEEET!!
===
FIRCC did a redesign of the off-road track, keep the cross over, added a LONG back straight. John (the designer) wants MORE space for this design BUT the room is only so big!
.
FIRCC (Plant City)
Wanted to race the SC10, WANTED IT BAD!!!!!! :-)
After four practice sessions, moved to the XXX-SCT!!!!
20 foot into the 4th practice the Castle Sidewinder SCT esc died in the SC10!!!! :-(
Had fast enough 1st qual to put me into the A-main, 5th starting place. After the 2nd qual I was still in the A-main but will start 8th!
6 of the 8 in the A-main were ex-Farmers racers! Very SWEEEET!!!
Started 8th finished 8th, ANY time you make the A-main where ever you finish it's SWEEEET!!
===
FIRCC did a redesign of the off-road track, keep the cross over, added a LONG back straight. John (the designer) wants MORE space for this design BUT the room is only so big!
.
Saturday, August 13, 2011
8/13/11
FIRCC (Plant City)
Losi XXX-SCT
Put the Speed Passion GT1.1 esc in with a new (used) Novak 13.5 motor that I got on R/C Tech Buy/sale section. Paid $20 shipped for the motor. :-)
Qual'd 6th, The five in front of me, I have NEVER beat unless they broke!
Was in 6th until lap 19, got by 5th and 4th and was able to hold them off for the last three laps for 4th!! :-)
===
Associated SC10
Had a Castle Sidewinder SCT esc with a Fantom 17.5 motor installed and was testing this setup as a possible option in case the Losi wasn't running right.
Ran out of time, as I was also assisting Conner with his HPI Blitz.
===
"Make a RC Wish" donated 10 free 20oz Coke products coupons for the top three finishers in each class.
.
FIRCC (Plant City)
Losi XXX-SCT
Put the Speed Passion GT1.1 esc in with a new (used) Novak 13.5 motor that I got on R/C Tech Buy/sale section. Paid $20 shipped for the motor. :-)
Qual'd 6th, The five in front of me, I have NEVER beat unless they broke!
Was in 6th until lap 19, got by 5th and 4th and was able to hold them off for the last three laps for 4th!! :-)
===
Associated SC10
Had a Castle Sidewinder SCT esc with a Fantom 17.5 motor installed and was testing this setup as a possible option in case the Losi wasn't running right.
Ran out of time, as I was also assisting Conner with his HPI Blitz.
===
"Make a RC Wish" donated 10 free 20oz Coke products coupons for the top three finishers in each class.
.
Saturday, August 6, 2011
8/6/11
Yupers
After driving 62.5 miles to get there didn't get to race cause they were racn' their "series" and I had not raced any of the other "series" races. BUT the "series" racers would gladly race with us after the "series" race!!!!! Guess they didn't need the $20 to race!!
===
Got to see and talk with Mike (he didn't get to race either) about racn' and THR t-shirts. Ordered a t-shirt to see how they will look before I inform the THR members!
Had a GREAT time talking about the "OLD DAYS at Farmers". Sure miss that track, Greg and most of the racers! "Friday Night Under the Lights!!!"
.
Yupers
After driving 62.5 miles to get there didn't get to race cause they were racn' their "series" and I had not raced any of the other "series" races. BUT the "series" racers would gladly race with us after the "series" race!!!!! Guess they didn't need the $20 to race!!
===
Got to see and talk with Mike (he didn't get to race either) about racn' and THR t-shirts. Ordered a t-shirt to see how they will look before I inform the THR members!
Had a GREAT time talking about the "OLD DAYS at Farmers". Sure miss that track, Greg and most of the racers! "Friday Night Under the Lights!!!"
.
Saturday, July 30, 2011
7/29/11
FIRCC
GREAT night of racn'!!!!!!!!!!!!
Had planed to race the J82 buggy, after the first qual, changed it over to the T4!!!!
90% of a setup is TIRES!!! Both rear sets that I have (for the J82) are over 50% worn out!
Broke the servo just before the start of qual #2, got on the track 1 lap down, never looked to see how far down I was at the end of the 6 minute main.
Started 5th in the 10 minute main finished 5th, 4th lapped me 2 times best I could count!!
===
De$troyed the diff in the Lo$i XXX-S$T again!!!!!!!!!!!
Have raced Associated Electric (AE) for 7 years and have NEVER had thi$ kind of problem$ with their diff'$!!!!!!
Ordered MORE part$
.
FIRCC
GREAT night of racn'!!!!!!!!!!!!
Had planed to race the J82 buggy, after the first qual, changed it over to the T4!!!!
90% of a setup is TIRES!!! Both rear sets that I have (for the J82) are over 50% worn out!
Broke the servo just before the start of qual #2, got on the track 1 lap down, never looked to see how far down I was at the end of the 6 minute main.
Started 5th in the 10 minute main finished 5th, 4th lapped me 2 times best I could count!!
===
De$troyed the diff in the Lo$i XXX-S$T again!!!!!!!!!!!
Have raced Associated Electric (AE) for 7 years and have NEVER had thi$ kind of problem$ with their diff'$!!!!!!
Ordered MORE part$
.
Tuesday, July 26, 2011
7/26/2011
Made some changes to the race fleet! :-)
===
Losi XXX-SCT
Changed ESC and motor to Castle Sidewinder SCT and Ezrun 9.0 motor, replaced the 13.5mm stock rotor with 12.5mm Speed Passion rotor. WAY FAST!!!!!!!!!!! Mod SC class should be fun!!!!!
Associated SC10
Now has a Castle Sidewinder esc and a Fantom 17.5 motor. This was done so I can race the SC10 in Stock SC class.
Associated T4
Removed the Novak Dually ESC and Trinity Cobalt 27 brush motor, replace them with the Speed Passion GT1.1 ESC and Speed Passion 10.5 brushless motor. This is the FAST-est setup EVER in the T4 this year!!!
T4 side bar:-)
Have a J82 kit!
The JConcepts J82 - Converts RC10T4 truck to 1/8th 2wd electric buggy! <<< YES!!!
Change to the J82 body (with wing), front and rear wheels you have a BUGGY to race.
A VERY GOOD race buggy!! :-)
.
Made some changes to the race fleet! :-)
===
Losi XXX-SCT
Changed ESC and motor to Castle Sidewinder SCT and Ezrun 9.0 motor, replaced the 13.5mm stock rotor with 12.5mm Speed Passion rotor. WAY FAST!!!!!!!!!!! Mod SC class should be fun!!!!!
Associated SC10
Now has a Castle Sidewinder esc and a Fantom 17.5 motor. This was done so I can race the SC10 in Stock SC class.
Associated T4
Removed the Novak Dually ESC and Trinity Cobalt 27 brush motor, replace them with the Speed Passion GT1.1 ESC and Speed Passion 10.5 brushless motor. This is the FAST-est setup EVER in the T4 this year!!!
T4 side bar:-)
Have a J82 kit!
The JConcepts J82 - Converts RC10T4 truck to 1/8th 2wd electric buggy! <<< YES!!!
Change to the J82 body (with wing), front and rear wheels you have a BUGGY to race.
A VERY GOOD race buggy!! :-)
.
7/22/2011
Man I thought I had posted about 7/22/2011!!!!!!!!!!!!
FIRCC 7/22/2011
Seven EX-Farmers racers showed up to race tonight!! SWEEET!!!! :-)
Had the Castle Sidewinder SCT esc and Speed Passion 10.5 motor in the Losi XXX-SCT. JUST WOULD NOT TURN!!!! Did ALL the normal adjustment that I would normally do NOthing worked.
Got the SC10 out and it TURNED WORSE!!!!
Was I bummed!!!
As I sat looking at the XXX-SCT and SC10 I noticed that they where setup differently! So, I changed the Losi just the opposite that I had been doing. Moved the front shocks out at the top BINGO!!! :-)
Made the A-main started 5th and finished 5th ONLY one lap down to 1-3 places.
.
Man I thought I had posted about 7/22/2011!!!!!!!!!!!!
FIRCC 7/22/2011
Seven EX-Farmers racers showed up to race tonight!! SWEEET!!!! :-)
Had the Castle Sidewinder SCT esc and Speed Passion 10.5 motor in the Losi XXX-SCT. JUST WOULD NOT TURN!!!! Did ALL the normal adjustment that I would normally do NOthing worked.
Got the SC10 out and it TURNED WORSE!!!!
Was I bummed!!!
As I sat looking at the XXX-SCT and SC10 I noticed that they where setup differently! So, I changed the Losi just the opposite that I had been doing. Moved the front shocks out at the top BINGO!!! :-)
Made the A-main started 5th and finished 5th ONLY one lap down to 1-3 places.
.
Saturday, July 16, 2011
7/15/11
FIRCC (Plant City)
GREAT "DRY" night of racn'. 5 new racers to the track. 3 first time EVER to race.
Losi XXX-SCT
Removed the 17.5 motor and Speed Passion ESC, replaced them with a Speed Passion 10.5 motor and a Castle Sidewinder ESC. Was thinking I needed MORE power. Still didn't make the A-main, did TQ the B-main and after 10 laps (was in 4th most of those) was able to get past everyone to finish 1st after 20 laps!!!
Associated SC10
Replace the Speed Passion 10.5 motor and a Castle Sidewinder ESC, that I put in the XXX-SCT with a LRP X11 7.5 motor and a Castle Sidewinder SCT ESC. WAY TO MUCH POWER!!! Just would NOT turn. BUT may just be the setup for FZRC (Sarasota) or Yupers (Lakeland).
.
FIRCC (Plant City)
GREAT "DRY" night of racn'. 5 new racers to the track. 3 first time EVER to race.
Losi XXX-SCT
Removed the 17.5 motor and Speed Passion ESC, replaced them with a Speed Passion 10.5 motor and a Castle Sidewinder ESC. Was thinking I needed MORE power. Still didn't make the A-main, did TQ the B-main and after 10 laps (was in 4th most of those) was able to get past everyone to finish 1st after 20 laps!!!
Associated SC10
Replace the Speed Passion 10.5 motor and a Castle Sidewinder ESC, that I put in the XXX-SCT with a LRP X11 7.5 motor and a Castle Sidewinder SCT ESC. WAY TO MUCH POWER!!! Just would NOT turn. BUT may just be the setup for FZRC (Sarasota) or Yupers (Lakeland).
.
Sunday, July 10, 2011
7/10/11
FZRC (Sarasota)
Losi XXX-SCT
As I was standing on the drivers stand, for the Stock SC class, I looked over my left shoulder and watched 5 KIDS place their SC's on to the track and come on to the drivers stand!!!!!!! As I was beginning to step down and go change to Mod SC class a ADULT stepped on to the drivers stand! TQ'd both qual's and finished 1st, 2 laps ahead of the other ADULT, in Stock SC.
Race director called me out just before the start of the main. Said I should start last to give the KIDS a even chance. Moved to the rear of the start order, by turn 5 was in 3rd, by turn 6 was in 2nd, by the start/finish line was in 1st. Drove through the pack, started in 7th, in one lap.
Looking to change to Mod SC next race!
===
RC10T4
Pinion gear came loose during both qual's in Stadium Truck class. So I qual'd 4th. During the main, going into turn 4 about 3 inches behind Max in 1st, 3rd hit the T4 in the left rear and knocked the top link loose, after I got the T4 and rear axle from the turn marshal, walked over to the pits. Put the bits back together and was back in the action 5 laps down!!!
There was enough time to get two laps back!!! So I finished in 4th down by three laps!!! Told Max (in 1st) that I had nothing to lose as I'm 5 laps down so stay out of my way! Wanted Max to know I wasn't going to be nice (passing anyone) making up laps.
.
FZRC (Sarasota)
Losi XXX-SCT
As I was standing on the drivers stand, for the Stock SC class, I looked over my left shoulder and watched 5 KIDS place their SC's on to the track and come on to the drivers stand!!!!!!! As I was beginning to step down and go change to Mod SC class a ADULT stepped on to the drivers stand! TQ'd both qual's and finished 1st, 2 laps ahead of the other ADULT, in Stock SC.
Race director called me out just before the start of the main. Said I should start last to give the KIDS a even chance. Moved to the rear of the start order, by turn 5 was in 3rd, by turn 6 was in 2nd, by the start/finish line was in 1st. Drove through the pack, started in 7th, in one lap.
Looking to change to Mod SC next race!
===
RC10T4
Pinion gear came loose during both qual's in Stadium Truck class. So I qual'd 4th. During the main, going into turn 4 about 3 inches behind Max in 1st, 3rd hit the T4 in the left rear and knocked the top link loose, after I got the T4 and rear axle from the turn marshal, walked over to the pits. Put the bits back together and was back in the action 5 laps down!!!
There was enough time to get two laps back!!! So I finished in 4th down by three laps!!! Told Max (in 1st) that I had nothing to lose as I'm 5 laps down so stay out of my way! Wanted Max to know I wasn't going to be nice (passing anyone) making up laps.
.
Saturday, July 9, 2011
7/8/11
FIRCC (Plant City)
FYI FIRCC does NOT use a "Bump Up" racing. "Bump Up" is when there is more than one main per class and the top two finishers "Bump Up" to the next main!
20 SC entries makes for 3 main! I was TQ in the B-main and lead from the tone!!! :-)
My over all (laps in 6 minutes) would have place me finishing 6th in the A-main! :-)
One racer left before the start of the mains AND IF I had known that I would have asked for a A-main start position!! BUT the race director DIDN'T know until the A-main.
===
A racer in ST class broke his truck, didn't have the part to fix his truck. The T4 was just sitting there, under the pit table. :-) He got one and a half lap in before the steering servo broke! :-(
.
FIRCC (Plant City)
FYI FIRCC does NOT use a "Bump Up" racing. "Bump Up" is when there is more than one main per class and the top two finishers "Bump Up" to the next main!
20 SC entries makes for 3 main! I was TQ in the B-main and lead from the tone!!! :-)
My over all (laps in 6 minutes) would have place me finishing 6th in the A-main! :-)
One racer left before the start of the mains AND IF I had known that I would have asked for a A-main start position!! BUT the race director DIDN'T know until the A-main.
===
A racer in ST class broke his truck, didn't have the part to fix his truck. The T4 was just sitting there, under the pit table. :-) He got one and a half lap in before the steering servo broke! :-(
.
Sunday, July 3, 2011
7/3/11
FZRC
Stock SC >>> Losi XXX-SCT
Decided to use ONLY the "Peak Racing" 4800 (got it used off R/C Tech) pack as power for the day. That was the only change from what was used 4 weeks ago. TQ'd all 3 qual and won the 8 minute main by a lap!!!! Sweeeet!!!!
Stadium Truck >>> Associated RC10T4
TQ'd the 2nd qual and lead most of the 8 minute main, lost the lead on the next to the last lap and was pushing the leader into the next to last turn and hit a pipe!!! Finished 2nd by 2 sec!!! The T4 was the ONLY BRUSHED motored truck in the class!!!!!
===
While on the drivers stand during practice I met James, during the day we became friends. As it was he's 2nd race ever, I seen he could benefit from some mentoring. :-) James was seeing improvements, in his cars and driving, through the day of racn'. After the racn' was done we got together and had "race driving" classes :-)!!!!
We are doing again 7/24 at FZRC!!!
.
FZRC
Stock SC >>> Losi XXX-SCT
Decided to use ONLY the "Peak Racing" 4800 (got it used off R/C Tech) pack as power for the day. That was the only change from what was used 4 weeks ago. TQ'd all 3 qual and won the 8 minute main by a lap!!!! Sweeeet!!!!
Stadium Truck >>> Associated RC10T4
TQ'd the 2nd qual and lead most of the 8 minute main, lost the lead on the next to the last lap and was pushing the leader into the next to last turn and hit a pipe!!! Finished 2nd by 2 sec!!! The T4 was the ONLY BRUSHED motored truck in the class!!!!!
===
While on the drivers stand during practice I met James, during the day we became friends. As it was he's 2nd race ever, I seen he could benefit from some mentoring. :-) James was seeing improvements, in his cars and driving, through the day of racn'. After the racn' was done we got together and had "race driving" classes :-)!!!!
We are doing again 7/24 at FZRC!!!
.
Saturday, July 2, 2011
7/1/11
FIRCC
Wanted to race the T4-LL BUT broken front a-arm ended that want! A T4-LL is a T4 with lipo battery power, a new-ish thing Jan 2009. Lipo batteries were/are lighter than the NiHM batteries that we were using then. Lighter weight shock oils and spring rates where tried at CRCRC in Ohio by the AE team drivers and they won EVERYTHING!!!!!
Because of the a-arm problem I raced the SC10 in SC class made the A-main, missed 6th place by a few seconds because I crashed and a ssssllllloooooowwwwww marshal who had to to take three steps to the SC10!!!!!
Thinking the Losi XXX-SCT have proved that the diff can take the power, so I may put a faster motor in for MOD SC class soon.
.
FIRCC
Wanted to race the T4-LL BUT broken front a-arm ended that want! A T4-LL is a T4 with lipo battery power, a new-ish thing Jan 2009. Lipo batteries were/are lighter than the NiHM batteries that we were using then. Lighter weight shock oils and spring rates where tried at CRCRC in Ohio by the AE team drivers and they won EVERYTHING!!!!!
Because of the a-arm problem I raced the SC10 in SC class made the A-main, missed 6th place by a few seconds because I crashed and a ssssllllloooooowwwwww marshal who had to to take three steps to the SC10!!!!!
Thinking the Losi XXX-SCT have proved that the diff can take the power, so I may put a faster motor in for MOD SC class soon.
.
Friday, July 1, 2011
Sunday, June 19, 2011
6/18/2011
Yuper Motors RC Complex Lakeland, FL
Two "Make a RC Wish" ("MRCW") recipients pitted with me, both are Team Holy Rollers members also!!! :-)
Josh raced his Duratrax ST for the first time ever, he received the RC August 2010!!! He finished 4th in beginners class.
Jordon traded the Duratrax BX that he received August 2010 in for a Traxxas Rustler, the BX wasn't working like "MRCW" wanted a FREE RC to work, so they offered him a change out!!
Jordon, first race with the Rustler, he finished 2nd!!!! SWEEEET!!!
===
TQ'd the Losi in SC first qual. Second qual two racers out did me so I started 3rd in the main. Finished 4th, one place out of trophy!!! :-(
Did win the 50-50 drawing!!! :-) Took home $37.50!!!!!!!!!!
.
Yuper Motors RC Complex Lakeland, FL
Two "Make a RC Wish" ("MRCW") recipients pitted with me, both are Team Holy Rollers members also!!! :-)
Josh raced his Duratrax ST for the first time ever, he received the RC August 2010!!! He finished 4th in beginners class.
Jordon traded the Duratrax BX that he received August 2010 in for a Traxxas Rustler, the BX wasn't working like "MRCW" wanted a FREE RC to work, so they offered him a change out!!
Jordon, first race with the Rustler, he finished 2nd!!!! SWEEEET!!!
===
TQ'd the Losi in SC first qual. Second qual two racers out did me so I started 3rd in the main. Finished 4th, one place out of trophy!!! :-(
Did win the 50-50 drawing!!! :-) Took home $37.50!!!!!!!!!!
.
Friday, June 10, 2011
6/10/11
FIRCC (Plant City)
45 minute drive turned into a 2 HOUR sit on I4!!! Don't know if anyone has been hurt!
===
Steve had a servo go bad in his Blitz, so as he was packing up to go home. I offered T3T4 Web Service backup SC truck (SC10). Took him two qual's to beat me out of being in the A-main!!!! For one night Steve and I where T3T4 Web Service team mates AS WELL as Team Holy Rollers team mates.
I finished 1st in the B-main for Stock SC. Why wasn't I in the A-main as a bump-up? FIRCC doesn't do bump-ups!
.
FIRCC (Plant City)
45 minute drive turned into a 2 HOUR sit on I4!!! Don't know if anyone has been hurt!
===
Steve had a servo go bad in his Blitz, so as he was packing up to go home. I offered T3T4 Web Service backup SC truck (SC10). Took him two qual's to beat me out of being in the A-main!!!! For one night Steve and I where T3T4 Web Service team mates AS WELL as Team Holy Rollers team mates.
I finished 1st in the B-main for Stock SC. Why wasn't I in the A-main as a bump-up? FIRCC doesn't do bump-ups!
.
Sunday, June 5, 2011
6/5/11
FZRC!!!!!!!!!!!!!
Hot! HOT!! HOT!!!!!!!!!!!
Not entirely the racing! 100 degrees by 2:00pm!!!
Stadium Truck <<< Haven't race this class in some time, BUT a 1st is a 1st!! :-)
Stock Short Course Jim only beat me by a half sec A N D a lap LOL!!!!
===
Friday after working a few hours in the morning, visited a new track in Lakeland "Yuper Motors RC Complex" they have three tracks. A small off-road, a large off-road and an oval. Had a great visit, hope to race there in the future.
===
Next race >> FZRC on Dads day (Sunday 6/19/11) Marty said "What better day to celebrate Dads day than dads racn'"
.
FZRC!!!!!!!!!!!!!
Hot! HOT!! HOT!!!!!!!!!!!
Not entirely the racing! 100 degrees by 2:00pm!!!
Stadium Truck <<< Haven't race this class in some time, BUT a 1st is a 1st!! :-)
Stock Short Course Jim only beat me by a half sec A N D a lap LOL!!!!
===
Friday after working a few hours in the morning, visited a new track in Lakeland "Yuper Motors RC Complex" they have three tracks. A small off-road, a large off-road and an oval. Had a great visit, hope to race there in the future.
===
Next race >> FZRC on Dads day (Sunday 6/19/11) Marty said "What better day to celebrate Dads day than dads racn'"
.
Sunday, May 29, 2011
5/29/11
Decided to NOT race this weekend.
Time with my wife is PRICELESS!!!!!!!!!!!!! :-)
Watching LiveRC though!!!
===
Parts came in to make repairs to the "Make a RC Wish" Rustler, remember I hit a post at FZRC last Sat. May race it in ST's 2nd qual 6/5 at FZRC.
Found a set of front and rear body mounts for the Losi XXX-SCT on Ebay, for LESS then the local hobby shop even with shipping!!!!!
Got the GT2SC fueled, batteries charged and ran for a tank Sat just for FUN!!!
.
Decided to NOT race this weekend.
Time with my wife is PRICELESS!!!!!!!!!!!!! :-)
Watching LiveRC though!!!
===
Parts came in to make repairs to the "Make a RC Wish" Rustler, remember I hit a post at FZRC last Sat. May race it in ST's 2nd qual 6/5 at FZRC.
Found a set of front and rear body mounts for the Losi XXX-SCT on Ebay, for LESS then the local hobby shop even with shipping!!!!!
Got the GT2SC fueled, batteries charged and ran for a tank Sat just for FUN!!!
.
Sunday, May 22, 2011
5/22/11
Team T3/T4 Web Service Race Finish Results as of 5/15/11
Total races > 240
81 divide by 240 = 33.7%
71 divide by 240 = 29.5%
27 divide by 240 = 11.25%
1st = 81
2nd = 71
3rd = 27
4th = 23
5th = 10
6th = 13
7th = 3
8th = 6
9th = 3
10th = 2
11th = 1
======
Series / One of
7 divide by 23 = 30.4%
1st = 7
2nd = 7
3rd = 2
4th = 2
6th = 2
8th = 1
10th = 1
.
Team T3/T4 Web Service Race Finish Results as of 5/15/11
Total races > 240
81 divide by 240 = 33.7%
71 divide by 240 = 29.5%
27 divide by 240 = 11.25%
1st = 81
2nd = 71
3rd = 27
4th = 23
5th = 10
6th = 13
7th = 3
8th = 6
9th = 3
10th = 2
11th = 1
======
Series / One of
7 divide by 23 = 30.4%
1st = 7
2nd = 7
3rd = 2
4th = 2
6th = 2
8th = 1
10th = 1
.
5/22/11
Went to FZRC 5/21 to test and tune the SC10 and T4.
SC10
Changed the motor system to 19 turn brush motor, wanted to see how well a brush motor would work in Stock SC. Gear it right and it's SWEEEET! Gear it wrong and you fry a motor!!! Motor temp was 140 after six minutes of testing so I'm good. 160 temp is the max after five minutes if you want your motor to live!!!
T4
Put the Castle Sidewinder ESC and Speed Passion 10.5 motor in and after 8 minutes of testing motor temp was 138 VERY SWEEEET!!!
===
Decided to test/tune the "Make a RC Wish" Rustler. We try to race test every RC we give away. This has a Traxxas XL5 esc and a "handout" stock (27 turn) race motor. After 6 minutes of testing motor temp was 167, changed the motor pinion from a 21 tooth to a 20 tooth and the motor temp went to 186!!!!!!!! Was going to change to a 22, BUT as I was driving to the pits I hit a post and broke some of the steering parts! :-(
===
Looking GOOD for a visit to FIRCC Friday 5/27 for some carpet off-road!
.
Went to FZRC 5/21 to test and tune the SC10 and T4.
SC10
Changed the motor system to 19 turn brush motor, wanted to see how well a brush motor would work in Stock SC. Gear it right and it's SWEEEET! Gear it wrong and you fry a motor!!! Motor temp was 140 after six minutes of testing so I'm good. 160 temp is the max after five minutes if you want your motor to live!!!
T4
Put the Castle Sidewinder ESC and Speed Passion 10.5 motor in and after 8 minutes of testing motor temp was 138 VERY SWEEEET!!!
===
Decided to test/tune the "Make a RC Wish" Rustler. We try to race test every RC we give away. This has a Traxxas XL5 esc and a "handout" stock (27 turn) race motor. After 6 minutes of testing motor temp was 167, changed the motor pinion from a 21 tooth to a 20 tooth and the motor temp went to 186!!!!!!!! Was going to change to a 22, BUT as I was driving to the pits I hit a post and broke some of the steering parts! :-(
===
Looking GOOD for a visit to FIRCC Friday 5/27 for some carpet off-road!
.
Sunday, May 15, 2011
5/15/11
FZRC
Lead the 1st qual for ALL but the last two laps!!! :-(
Didn't even come close in the 2nd qual!!!!
Qual'd 3rd, haven't done that bad in Stock SC in some time!!!!!
Some how the 10 minute main became a 8 minute main!!!!
BUT, by turn five the Losi was in 1st and pulling away!!! :-)
===
Talked with a couple stadium truck racers about getting the T4 back out for some racing!!! :-)
Next race at FZRC is 6/5/11.
.
FZRC
Lead the 1st qual for ALL but the last two laps!!! :-(
Didn't even come close in the 2nd qual!!!!
Qual'd 3rd, haven't done that bad in Stock SC in some time!!!!!
Some how the 10 minute main became a 8 minute main!!!!
BUT, by turn five the Losi was in 1st and pulling away!!! :-)
===
Talked with a couple stadium truck racers about getting the T4 back out for some racing!!! :-)
Next race at FZRC is 6/5/11.
.
Saturday, May 14, 2011
Sunday, May 1, 2011
5/1/11
FZRC
First! The parts came in for the Losi!!! :-)
Signed the Losi up for Stock SC, they separated the Adults from the kids for the Qual's. Almost lapped 2nd place the 2nd time in the first qual. Raced the HPI Blitz in the 2nd qual, TQ'd that one also!!! They announced that I had the Blitz for sale!! SOLD!!!!!! :-)
Stock SC main, 2 Losi'd, 2 Blitz, 1 Slash and 2 SC10 lined up for the 10 minute main. The Losi was lapping racers by lap four, finished 2 laps in front of 2nd!!!
===
The SC10 was ready for Mod SC. TQ'd the 1st qual and NO ONE beat the SC10 time in the 2nd qual!!! Lap one of the 10 minute main was in front by a couple of seconds and pulling away!!! Then at lap 1 and a half, pinion slipped and removed the teeth from the spur!!!!!!! Was able to get the SC10 to the pits, changed the pinion and spur, back on the track to move up from 10th to 9th. Passed 2nd and 3rd once during that last two minutes!! So they only had 15 laps on me instead of 16! :-)
FZRC again in two weeks!!!
.
FZRC
First! The parts came in for the Losi!!! :-)
Signed the Losi up for Stock SC, they separated the Adults from the kids for the Qual's. Almost lapped 2nd place the 2nd time in the first qual. Raced the HPI Blitz in the 2nd qual, TQ'd that one also!!! They announced that I had the Blitz for sale!! SOLD!!!!!! :-)
Stock SC main, 2 Losi'd, 2 Blitz, 1 Slash and 2 SC10 lined up for the 10 minute main. The Losi was lapping racers by lap four, finished 2 laps in front of 2nd!!!
===
The SC10 was ready for Mod SC. TQ'd the 1st qual and NO ONE beat the SC10 time in the 2nd qual!!! Lap one of the 10 minute main was in front by a couple of seconds and pulling away!!! Then at lap 1 and a half, pinion slipped and removed the teeth from the spur!!!!!!! Was able to get the SC10 to the pits, changed the pinion and spur, back on the track to move up from 10th to 9th. Passed 2nd and 3rd once during that last two minutes!! So they only had 15 laps on me instead of 16! :-)
FZRC again in two weeks!!!
.
Friday, April 22, 2011
4/22/11
Florida Indoor R/C Complex in Plant City.
The XXX-SCT drove like it was on rails!! For two qual's, THEN as I was getting the Losi ready for the main!!! A CRACK in the rear T-bar!!!! As the ONLY Losi racer AND I had never broke this part before, a replacement was NOT in the house!!! :-(
Pulled the SC10 out from under the pit table and on went the Losi front tires, changed the throttle settings on the Spektrum DX2s radio to better fit the race needs.
Started last as I didn't qual the SC10, by turn three and until the end of the ten minute main the SC10 was in 1st and pulling away!!!
===
FZRC in Sarasota May 1st!!!
LET'S RACE!!!!!!!!!!!!!!!!!!!!!!!!!
.
Florida Indoor R/C Complex in Plant City.
The XXX-SCT drove like it was on rails!! For two qual's, THEN as I was getting the Losi ready for the main!!! A CRACK in the rear T-bar!!!! As the ONLY Losi racer AND I had never broke this part before, a replacement was NOT in the house!!! :-(
Pulled the SC10 out from under the pit table and on went the Losi front tires, changed the throttle settings on the Spektrum DX2s radio to better fit the race needs.
Started last as I didn't qual the SC10, by turn three and until the end of the ten minute main the SC10 was in 1st and pulling away!!!
===
FZRC in Sarasota May 1st!!!
LET'S RACE!!!!!!!!!!!!!!!!!!!!!!!!!
.
Friday, April 15, 2011
4/15/11
Florida Indoor R/C Complex in Plant City.
Very NICE carpet offroad track!!
Put the XXX-SCT on the track first, I have raced the SC10 here before. Fast down the straights and SMOOTH over the jumps! The turns is where you win or lose a race, the XXX-SCT just wasn't getting the job done!!!
Parked the XXX-SCT and got the SC10 ready to test. Had the carpet setup that worked the last time on the SC10, it turned 100% WORSE than the XXX-SCT!!!!
Changed the caster front and rear on the XXX-SCT, moved the front battery pad to the rear. NOW the XXX-SCT was turning like I needed!!!!!!! :-)
===
1st qual, the right rear MIP came apart. Found some forgotten MIP parts in the back of the part box. SWEEET!!!
2 qual, TQ'd that one :-)
Took three laps to get into the lead, finished 2 laps ahead of 2nd!!! Knew I had lapped him once didn't know that I had lapped him 2 times!!! :-)
The XXX-SCT drove like it was on rails!!
.
Florida Indoor R/C Complex in Plant City.
Very NICE carpet offroad track!!
Put the XXX-SCT on the track first, I have raced the SC10 here before. Fast down the straights and SMOOTH over the jumps! The turns is where you win or lose a race, the XXX-SCT just wasn't getting the job done!!!
Parked the XXX-SCT and got the SC10 ready to test. Had the carpet setup that worked the last time on the SC10, it turned 100% WORSE than the XXX-SCT!!!!
Changed the caster front and rear on the XXX-SCT, moved the front battery pad to the rear. NOW the XXX-SCT was turning like I needed!!!!!!! :-)
===
1st qual, the right rear MIP came apart. Found some forgotten MIP parts in the back of the part box. SWEEET!!!
2 qual, TQ'd that one :-)
Took three laps to get into the lead, finished 2 laps ahead of 2nd!!! Knew I had lapped him once didn't know that I had lapped him 2 times!!! :-)
The XXX-SCT drove like it was on rails!!
.
Sunday, April 10, 2011
4/10/11
FZRC
MOD SC
Had problems ALL day with the SC10! First the pinion gear wouldn't stay set, killed a spur also before the first Qual! Four minutes into the first Qual the esc started to glitch! Found out the receiver was bad! Had to race the B-main to get into the A-main. Did finish 1st in that!! :-)
A-main was 2nd on lap 3-5, then parked it on a corner post and was 8 for about 10 laps, then the esc over heated and I finished 11th. The same spot I started in!
STOCK SC
The Losi XXX-SCT was just SWEEEEET!!!! Passed every one BUT 1st place in both Qual's and the main, for 2nd place!!! :-)
.
FZRC
MOD SC
Had problems ALL day with the SC10! First the pinion gear wouldn't stay set, killed a spur also before the first Qual! Four minutes into the first Qual the esc started to glitch! Found out the receiver was bad! Had to race the B-main to get into the A-main. Did finish 1st in that!! :-)
A-main was 2nd on lap 3-5, then parked it on a corner post and was 8 for about 10 laps, then the esc over heated and I finished 11th. The same spot I started in!
STOCK SC
The Losi XXX-SCT was just SWEEEEET!!!! Passed every one BUT 1st place in both Qual's and the main, for 2nd place!!! :-)
.
Thursday, April 7, 2011
Sunday, March 27, 2011
3/27/11
FZRC (Sarasota, FL)
I have been racn' almost EVERY WEEKEND since Jan 06, today I TQ'd both qual and won the main in Stock SC. AND my wife watched me for the FIRST TIME EVER!!!!! :-)
Mod SC wasn't so good qual'd 7th and finished 6th!!!! Anytime you finish better than you qual, it's SWEEEEEET!!! :-)
===
April 2-3 OFF from racn', need some time with my LOVELY wife!!!
.
FZRC (Sarasota, FL)
I have been racn' almost EVERY WEEKEND since Jan 06, today I TQ'd both qual and won the main in Stock SC. AND my wife watched me for the FIRST TIME EVER!!!!! :-)
Mod SC wasn't so good qual'd 7th and finished 6th!!!! Anytime you finish better than you qual, it's SWEEEEEET!!! :-)
===
April 2-3 OFF from racn', need some time with my LOVELY wife!!!
.
Wednesday, March 23, 2011
3/19/11
Lil' Dover
Enough racers showed up to have two classes!! Is there a DRY spell OR what going on in the RC hobby?
After 5 - 6 minutes of track time the diff went out in the Losi AGAIN!!! :-(
Rebuilt the diff, three laps and the diff was dead AGAIN!!!!!!!!!!!!!!!!!!!!!
The SC10 was just sweet!! So I put the Sidewinder esc and EZrun 9 turn motor from the Losi into the SC10. Finished 3rd in Open SC :-)
Stadium Truck was the other class that raced, finished 2nd with a 19 turn BRUSH motor!!!
===
Lil' Dover next Sat 3/26 and FZRC Sun 3/27.
.
Lil' Dover
Enough racers showed up to have two classes!! Is there a DRY spell OR what going on in the RC hobby?
After 5 - 6 minutes of track time the diff went out in the Losi AGAIN!!! :-(
Rebuilt the diff, three laps and the diff was dead AGAIN!!!!!!!!!!!!!!!!!!!!!
The SC10 was just sweet!! So I put the Sidewinder esc and EZrun 9 turn motor from the Losi into the SC10. Finished 3rd in Open SC :-)
Stadium Truck was the other class that raced, finished 2nd with a 19 turn BRUSH motor!!!
===
Lil' Dover next Sat 3/26 and FZRC Sun 3/27.
.
Tuesday, March 15, 2011
3/15/11
All the parts came in to do a trans repair on the Losi XXX-SCT!
The EzRUN 9 turn motor was in the mail also! It's in the XXX-SCT with a Castle Sidewinder esc, VERY SMOOTH and FFAAAASSSTTT!!!!!!! :-)
===
The SC10 trans was dry diff balls, new balls and silicone grease fixed that!!
Re-bearinged the Speed Passion 10.5 motor for the SC10 hope to have that installed 3/16, for a bit of front yard testing.
===
Lil' Dover SC
Seems there is a Gentlemens agreement, between the SC director and the oval director) that the SC track will NOT use the oval's turns. Because we race on Sat and they race on Sun, which means they can't repair any damage in time for them to race. Seems fair, so the track gets changed Sat morning before we race! :-)
.
All the parts came in to do a trans repair on the Losi XXX-SCT!
The EzRUN 9 turn motor was in the mail also! It's in the XXX-SCT with a Castle Sidewinder esc, VERY SMOOTH and FFAAAASSSTTT!!!!!!! :-)
===
The SC10 trans was dry diff balls, new balls and silicone grease fixed that!!
Re-bearinged the Speed Passion 10.5 motor for the SC10 hope to have that installed 3/16, for a bit of front yard testing.
===
Lil' Dover SC
Seems there is a Gentlemens agreement, between the SC director and the oval director) that the SC track will NOT use the oval's turns. Because we race on Sat and they race on Sun, which means they can't repair any damage in time for them to race. Seems fair, so the track gets changed Sat morning before we race! :-)
.
Saturday, March 12, 2011
3/12/11
Lil' Dover SC
Killed the trans in the SC10! :-(
It's sitting next to the Losi XXX-SCT that is waiting trans parts also!!! :-(
Removed the crossover OR is that a crossunder!! The former track director at "WCRCC" assisted in updating parts of the track. Adjusted the track so we can use the left end of the oval track to add another CHALLANGE!!! :-)
===
Was planning to race at FZRC Sunday (3/13/11) BUT :-) My Dad and Mom are down from IL, so FAMILY comes first!!
.
Lil' Dover SC
Killed the trans in the SC10! :-(
It's sitting next to the Losi XXX-SCT that is waiting trans parts also!!! :-(
Removed the crossover OR is that a crossunder!! The former track director at "WCRCC" assisted in updating parts of the track. Adjusted the track so we can use the left end of the oval track to add another CHALLANGE!!! :-)
===
Was planning to race at FZRC Sunday (3/13/11) BUT :-) My Dad and Mom are down from IL, so FAMILY comes first!!
.
Saturday, March 5, 2011
3/5/11
Lil' Dover SC
Racers from FZRC in Sarasota came up for some CLAY racn'!!!
Tried to talk them into a 20 minute main!! Settled for 10 minute main! :-(
Broke before the 1st qual, TQ'd the 2nd qual and broke in the 3rd qual!!
Best I could do is try to bump up into the A-main, was in 1st for most of B-main, at the 6 minute mark was passed. Told the guy, as he was standing next to me that I'm backing off (after he passed me) to save for the A-main. DIDN'T know there was ONLY 1 BUMP UP!!!!
Got to marshal one GREAT 10 minute A-main!! They reversed the start order, so the TQ started LAST!!! Took Steve 1 and a half lap to race through the pack into 1st!!
===
Next week Lil' Dover Sat and FZRC Sun!!!
.
Lil' Dover SC
Racers from FZRC in Sarasota came up for some CLAY racn'!!!
Tried to talk them into a 20 minute main!! Settled for 10 minute main! :-(
Broke before the 1st qual, TQ'd the 2nd qual and broke in the 3rd qual!!
Best I could do is try to bump up into the A-main, was in 1st for most of B-main, at the 6 minute mark was passed. Told the guy, as he was standing next to me that I'm backing off (after he passed me) to save for the A-main. DIDN'T know there was ONLY 1 BUMP UP!!!!
Got to marshal one GREAT 10 minute A-main!! They reversed the start order, so the TQ started LAST!!! Took Steve 1 and a half lap to race through the pack into 1st!!
===
Next week Lil' Dover Sat and FZRC Sun!!!
.
Sunday, February 27, 2011
2/27/11
FZRC in Sarasota, FL.
They need to stop raking the track and pack it instead! The surface is FL black sand dirt!!! Water and power packing is the only thing that will prep the track properly!!!
After two rounds of qualifing the surface was about 80% good on 40% of the track!!!
Qualified 4th and finished 4th. Had fastest lap (17.752) by .667 of a second. 4 seconds in front of 5th, 6 seconds behind 3rd!!! :-)
Talked to Marty, the owner about how to better prepare the track surface for the next race in two weeks. Pointed out the GOOD sections, the bad section and how to prepare the bad sections. He had been using a a water filled roller and he wasn't pleased with the results, just didn't know what was needed to prepare the surface better.
===
"Make a RC Wish" provided FREE "Coca Cola" drink coupons to the top 3 finishers and TQ in each class.
They had a need of a speaker for their sound system so "MRCW" provide one! :-)
.
FZRC in Sarasota, FL.
They need to stop raking the track and pack it instead! The surface is FL black sand dirt!!! Water and power packing is the only thing that will prep the track properly!!!
After two rounds of qualifing the surface was about 80% good on 40% of the track!!!
Qualified 4th and finished 4th. Had fastest lap (17.752) by .667 of a second. 4 seconds in front of 5th, 6 seconds behind 3rd!!! :-)
Talked to Marty, the owner about how to better prepare the track surface for the next race in two weeks. Pointed out the GOOD sections, the bad section and how to prepare the bad sections. He had been using a a water filled roller and he wasn't pleased with the results, just didn't know what was needed to prepare the surface better.
===
"Make a RC Wish" provided FREE "Coca Cola" drink coupons to the top 3 finishers and TQ in each class.
They had a need of a speaker for their sound system so "MRCW" provide one! :-)
.
Sunday, February 20, 2011
2/19/11
Lil' Dover SC
Steve had the track in Premo shape!!!! Traction was high all day!!!
Got to start the mains about 45 minutes earlier than normal so, 20 minuts mains was the deal!!!
Qualified 3rd behind Richard, passed him and Steve by turn two was in last by the last turn!!!!
By lap two I was in 1st and it wasn't until lap 8 that Richard passed me. We stayed about 20-30 foot apart for the next 16 minutes. I was waiting for Richards lipo to dump, he was running a MOD motor and I had a STOCK motor. A stock motor doesn't use as much power as a MOD does. Didn't happen he still had enough power to out run me on the last two laps!!!
===
As we where waiting for our lipos to charge after the 2nd qualifier. Billy asked to become a Team Holly Rollers member, that makes 6 THR members at one track!!!!
===
Lil' Dover next Sat and FZRC next Sun!!
===
The changes made to the Losi XXX-SCT at FZRC last Sun WORKED great at Lil' Dover!!!
Now the SC10 is a slow SC!!!
.
Lil' Dover SC
Steve had the track in Premo shape!!!! Traction was high all day!!!
Got to start the mains about 45 minutes earlier than normal so, 20 minuts mains was the deal!!!
Qualified 3rd behind Richard, passed him and Steve by turn two was in last by the last turn!!!!
By lap two I was in 1st and it wasn't until lap 8 that Richard passed me. We stayed about 20-30 foot apart for the next 16 minutes. I was waiting for Richards lipo to dump, he was running a MOD motor and I had a STOCK motor. A stock motor doesn't use as much power as a MOD does. Didn't happen he still had enough power to out run me on the last two laps!!!
===
As we where waiting for our lipos to charge after the 2nd qualifier. Billy asked to become a Team Holly Rollers member, that makes 6 THR members at one track!!!!
===
Lil' Dover next Sat and FZRC next Sun!!
===
The changes made to the Losi XXX-SCT at FZRC last Sun WORKED great at Lil' Dover!!!
Now the SC10 is a slow SC!!!
.
Sunday, February 13, 2011
2/13/11
FZRC in Sarasota was the place to race today!!!
Left the SC10 in the car trunk, raced the Losi XXX-SCT. Got tangaled up with some other SC's on lap two and never got back up to speed as needed to make a run for TQ in the first qualifier.
At the tone in qaulifier two I was off in a flash!!! :-) By lap two I had a 1/3 of a lap on second!! SWEEET!! Lapped every one up to third, two times by the finish of the qualifier. This put me in third postion for the A-main!!! By the 6 minute 27 second mark I was sitting in the pits with a fried motor!!! :-(
Still got a ninth out of twelve racers!!!
===
The Losi XXX-SCT was just SWEEEEET!!! Time to put a page for it on T3 T4 Web Service's web site!!!!
.
FZRC in Sarasota was the place to race today!!!
Left the SC10 in the car trunk, raced the Losi XXX-SCT. Got tangaled up with some other SC's on lap two and never got back up to speed as needed to make a run for TQ in the first qualifier.
At the tone in qaulifier two I was off in a flash!!! :-) By lap two I had a 1/3 of a lap on second!! SWEEET!! Lapped every one up to third, two times by the finish of the qualifier. This put me in third postion for the A-main!!! By the 6 minute 27 second mark I was sitting in the pits with a fried motor!!! :-(
Still got a ninth out of twelve racers!!!
===
The Losi XXX-SCT was just SWEEEEET!!! Time to put a page for it on T3 T4 Web Service's web site!!!!
.
2/12/11
Lil' Dover SC, rained Thursday guess only 8 racers know the track has GOOD drainage and Steve had the track ready to race by 9:30am, when I got there!!! 8 racers! DON"T make for a race day!!!!
So, the racers that did show up, spent the times testing and tuning there trucks.
Assisted Dennis in getting his Losi XXX-SCT so he could keep up with mine!!! :-)
Had a Tekin 10.5 motor come apart last week and with info from Tekin's forum was able to reassemble the motor. Tested this today, after two laps it smoked!!! My number two motor is dead!! :-(
.
Lil' Dover SC, rained Thursday guess only 8 racers know the track has GOOD drainage and Steve had the track ready to race by 9:30am, when I got there!!! 8 racers! DON"T make for a race day!!!!
So, the racers that did show up, spent the times testing and tuning there trucks.
Assisted Dennis in getting his Losi XXX-SCT so he could keep up with mine!!! :-)
Had a Tekin 10.5 motor come apart last week and with info from Tekin's forum was able to reassemble the motor. Tested this today, after two laps it smoked!!! My number two motor is dead!! :-(
.
Saturday, February 5, 2011
2/5/11
Lil' Dover SC (Sefner, FL) >>>> RAINED OUT!!!! :-(
BUT :-)
Richard, Steve, Javier and I decided to go over to the carpet track in Plant City, FL (Florida Indoor R/C Complex). Steve and Javier, THR's two newest members, have never seen OR raced on a carpet track. Richard has watch me race there. About 70 minutes into the afternoon, started doing "racing" classes! :-) Turn and jump theory, with application.
During the "classes", we did some "Slash" truck setups to Richards and Javier SC's. Most where learned way back when Short Course racing came to Farmers Sept/Oct 2008. Man, I some times forget that I'm THAT old and was at Farmers the night we seen a Traxxas Slash for the first time!!!
Richard and Javier after 3 - 4 batteries where turning laps only 3 - 4 tenth of a second slower then me.
Steve tried some setup changes to his Blitz, then did a couple laps better than me by 2 tenths!!!
Richard and Javier wondered if the new setups would work on clay tracks also! The only change needed will be tires to fit the track surface.
Time spent with friends AND Team Members is priceless!!!!!
===
Florida Indoor R/C Complex
Florida Indoor R/C Complex off road track pictures
.
Lil' Dover SC (Sefner, FL) >>>> RAINED OUT!!!! :-(
BUT :-)
Richard, Steve, Javier and I decided to go over to the carpet track in Plant City, FL (Florida Indoor R/C Complex). Steve and Javier, THR's two newest members, have never seen OR raced on a carpet track. Richard has watch me race there. About 70 minutes into the afternoon, started doing "racing" classes! :-) Turn and jump theory, with application.
During the "classes", we did some "Slash" truck setups to Richards and Javier SC's. Most where learned way back when Short Course racing came to Farmers Sept/Oct 2008. Man, I some times forget that I'm THAT old and was at Farmers the night we seen a Traxxas Slash for the first time!!!
Richard and Javier after 3 - 4 batteries where turning laps only 3 - 4 tenth of a second slower then me.
Steve tried some setup changes to his Blitz, then did a couple laps better than me by 2 tenths!!!
Richard and Javier wondered if the new setups would work on clay tracks also! The only change needed will be tires to fit the track surface.
Time spent with friends AND Team Members is priceless!!!!!
===
Florida Indoor R/C Complex
Florida Indoor R/C Complex off road track pictures
.
Sunday, January 30, 2011
1/29/2011
"Make a RC Wish" SC Shootout
Got to the track by 6:40AM only one there!!!!! Unloaded the car with a flashlight in my mouth to see by!!!
Steve got there by 7am, checked the track, booted the computer, loaded the printer. YEA!!! the printer works!!!
7:30 out of COFFEE, just know it's down hill from here for the day!!!
Did a quick head figure of the prises we have to give away today $450 to $500, only one sponsor prises didn't get here on time BUT they can be use on normal Sat races as awards! :-)
Results and pictures here;
http://www.rcwish.com/race_11.html
===
Broke the diff in the Losi SC during the first qual! :-(
Qual 4th with the SC10 was 2nd by lap 2 by lap 15 I was in the pits with a spun left rear rim!!! For a 8th finish in Open SC.
===
Richard (a Team Holly Rollers member) asked me for some more THR stickers for his new body AND for a buddy be brought to the race. I asked Richard IF he could ask his buddy the ? to become a THR member.
To become a member of TEAM HOLY ROLLERS you have to agree to a few simple proclamations.
1) You must believe that Jesus is GOD and is part of the Holy Trinity (Father, Son & Holy Spirit).
2) That Jesus Died for our sins.
3) and that once Jesus was dead that He rose from the dead and ascended to heaven.
4) That you will proclaim your beliefs when asked about them.
5) That your life reflects Christ (or at least you are tring to reflect Christ)
6) That when someone is in need and you have. That you will help with the kind of love that He has shown you.
He did and Jaivier became a member, BUT as Javier was anwsering the ? Steve came up and asked to be a member!!!!!
Two new members in 3-4 minutes!!! SWEEEEEET!!!!
.
"Make a RC Wish" SC Shootout
Got to the track by 6:40AM only one there!!!!! Unloaded the car with a flashlight in my mouth to see by!!!
Steve got there by 7am, checked the track, booted the computer, loaded the printer. YEA!!! the printer works!!!
7:30 out of COFFEE, just know it's down hill from here for the day!!!
Did a quick head figure of the prises we have to give away today $450 to $500, only one sponsor prises didn't get here on time BUT they can be use on normal Sat races as awards! :-)
Results and pictures here;
http://www.rcwish.com/race_11.html
===
Broke the diff in the Losi SC during the first qual! :-(
Qual 4th with the SC10 was 2nd by lap 2 by lap 15 I was in the pits with a spun left rear rim!!! For a 8th finish in Open SC.
===
Richard (a Team Holly Rollers member) asked me for some more THR stickers for his new body AND for a buddy be brought to the race. I asked Richard IF he could ask his buddy the ? to become a THR member.
To become a member of TEAM HOLY ROLLERS you have to agree to a few simple proclamations.
1) You must believe that Jesus is GOD and is part of the Holy Trinity (Father, Son & Holy Spirit).
2) That Jesus Died for our sins.
3) and that once Jesus was dead that He rose from the dead and ascended to heaven.
4) That you will proclaim your beliefs when asked about them.
5) That your life reflects Christ (or at least you are tring to reflect Christ)
6) That when someone is in need and you have. That you will help with the kind of love that He has shown you.
He did and Jaivier became a member, BUT as Javier was anwsering the ? Steve came up and asked to be a member!!!!!
Two new members in 3-4 minutes!!! SWEEEEEET!!!!
.
Sunday, January 23, 2011
1/22/11
RAIN on Friday!!! :-(
Steve was already at work draining the water from the track when I got there. Grabbed a shovel and joined in the track prep!! By 1pm the track was dry and we had one round of qual's in!! Odd thing, with the sun and wind we had to water the track for the mains!!!! 8-)
===
Qual'd in 2nd after three qual's! Very SWEET!!!
At the tone I bump drafted Richard (the TQ racer) about half way to turn one into the right lane pipe to move him out of my way!!! :-) By minute 4 of the 10 minute main he passed me for 1st :-( BUT at the 8 minute mark his speed control started to lipo "off" and I got by the 8:30 minute mark. He was back on the track, after a speed control reset and was behind me by about 10 foot at the finish!!!
A win is a WIN!!!! :-)
===
Got a XXX-SCT chassis to replace the XXXT extended chassis for the Losi SC truck, put a XXX-SCT base race setup on it with a couple changes I thought would make it better, PLUS good tires.
Drove WAY better with the new chassis. Drives like it's worth spending some $$$ on it now! So I order a rear bumper kit.
Won't be able to test or race it next week as it's "Make a RC Wish" SC Shootout weekend (1/29) and I will be busy doing car tech and running races. A VERY SWEET thing!!
===
New track to visit, FZRC, it's in Sarasota about 23 miles from the house. I heard it's about 350 foot run line, same as Lil' Dover SC track. They are planning to race every other Sunday. Was going to visit today BUT I stayed home, it was warmer inside.
They are racing 1/30 the day after "MRCW" SC S, figuring that I will be done in after my duties on the 29th that I will miss that one and try for there first race in Feb!!
.
RAIN on Friday!!! :-(
Steve was already at work draining the water from the track when I got there. Grabbed a shovel and joined in the track prep!! By 1pm the track was dry and we had one round of qual's in!! Odd thing, with the sun and wind we had to water the track for the mains!!!! 8-)
===
Qual'd in 2nd after three qual's! Very SWEET!!!
At the tone I bump drafted Richard (the TQ racer) about half way to turn one into the right lane pipe to move him out of my way!!! :-) By minute 4 of the 10 minute main he passed me for 1st :-( BUT at the 8 minute mark his speed control started to lipo "off" and I got by the 8:30 minute mark. He was back on the track, after a speed control reset and was behind me by about 10 foot at the finish!!!
A win is a WIN!!!! :-)
===
Got a XXX-SCT chassis to replace the XXXT extended chassis for the Losi SC truck, put a XXX-SCT base race setup on it with a couple changes I thought would make it better, PLUS good tires.
Drove WAY better with the new chassis. Drives like it's worth spending some $$$ on it now! So I order a rear bumper kit.
Won't be able to test or race it next week as it's "Make a RC Wish" SC Shootout weekend (1/29) and I will be busy doing car tech and running races. A VERY SWEET thing!!
===
New track to visit, FZRC, it's in Sarasota about 23 miles from the house. I heard it's about 350 foot run line, same as Lil' Dover SC track. They are planning to race every other Sunday. Was going to visit today BUT I stayed home, it was warmer inside.
They are racing 1/30 the day after "MRCW" SC S, figuring that I will be done in after my duties on the 29th that I will miss that one and try for there first race in Feb!!
.
Saturday, January 15, 2011
1/15/11
Lil' Dover SC
Hard day of racn' WORE ME OUT!!!
1st qual at the 3 minute mark, the SC10 started acting odd!!! NO power in a right hand turn, about two feet after a turn I had full power!!! Parked the SC10 to check it out!!
As I was checking the slipper I noticed the lift axle was spinning in the wheel rim!! GREAT I thought, another ruined rim! It was just a busted axle pin!!! :-)
Qualified 2nd, drove way over my head, lost 2nd was lucky to keep 3rd!!!
.
Lil' Dover SC
Hard day of racn' WORE ME OUT!!!
1st qual at the 3 minute mark, the SC10 started acting odd!!! NO power in a right hand turn, about two feet after a turn I had full power!!! Parked the SC10 to check it out!!
As I was checking the slipper I noticed the lift axle was spinning in the wheel rim!! GREAT I thought, another ruined rim! It was just a busted axle pin!!! :-)
Qualified 2nd, drove way over my head, lost 2nd was lucky to keep 3rd!!!
.
Sunday, January 9, 2011
1/8/11
At Lil' Dover SC tring to fine tune my drivers meeting skills. :-)
Had planed to race just one class BUT they needed another truck in Stadium Truck to make a class. Takes 3 to make a class. By the start of the first qualilfier there were two electric and two nitro truck in the class!
At the tone GO!!!! Was the last one to go at the tone, was in first after the first turn both qualifiers and first by the second turn in the main!!! The GT2-SC drove wonderfully and was still running at the end of each qual and main!!! VERY SWEEET!!!
Had the TQ in Mod SC with the SC10 by 5 seconds until the 2nd qaul and Richard topped me by two seconds.
:-( < cause I lost the TQ BUT :-) cause Richard is a Team Holy Rollers member!!!!
Dennis and I tangled about 20 foot into the main, he got to the first turn in last place. By lap 5 he was in the lead and I was 3rd (of 8 trucks). That is how we finished with Dennis also lapping me with two minutes left in the main.
.
At Lil' Dover SC tring to fine tune my drivers meeting skills. :-)
Had planed to race just one class BUT they needed another truck in Stadium Truck to make a class. Takes 3 to make a class. By the start of the first qualilfier there were two electric and two nitro truck in the class!
At the tone GO!!!! Was the last one to go at the tone, was in first after the first turn both qualifiers and first by the second turn in the main!!! The GT2-SC drove wonderfully and was still running at the end of each qual and main!!! VERY SWEEET!!!
Had the TQ in Mod SC with the SC10 by 5 seconds until the 2nd qaul and Richard topped me by two seconds.
:-( < cause I lost the TQ BUT :-) cause Richard is a Team Holy Rollers member!!!!
Dennis and I tangled about 20 foot into the main, he got to the first turn in last place. By lap 5 he was in the lead and I was 3rd (of 8 trucks). That is how we finished with Dennis also lapping me with two minutes left in the main.
.
Saturday, January 1, 2011
1/1/11 :-)
Lil' Dover SC Track
The turn out was so big they had to seperate the Open SC's from the Stock SC's!! <<< That is just SWWWWEEET!!!
TQ'd Open class, got marshaled out of contending for 1st and 2nd!!! BUT 3rd will do, tell next week!!! :-)
===
Giving up on the Losi XXX-SCT, works GREAT during practice, finishes in last in each qualifier raced. Get the SC10 out, same tires on the same track conditions and I TQ!!!! Go figure!!!!
===
28 days till the "Make a RC Wish" Short Course Shootout at Lil' Dover SC track. :-)
.
Lil' Dover SC Track
The turn out was so big they had to seperate the Open SC's from the Stock SC's!! <<< That is just SWWWWEEET!!!
TQ'd Open class, got marshaled out of contending for 1st and 2nd!!! BUT 3rd will do, tell next week!!! :-)
===
Giving up on the Losi XXX-SCT, works GREAT during practice, finishes in last in each qualifier raced. Get the SC10 out, same tires on the same track conditions and I TQ!!!! Go figure!!!!
===
28 days till the "Make a RC Wish" Short Course Shootout at Lil' Dover SC track. :-)
.
Subscribe to:
Posts (Atom)